Tell us what you need to pack — product, dose, sachet size and target output.

Sachet and filling machinery videos

Sachet Filling Machine Videos and Technical Demonstrations

These videos show examples of pouch handling, VFFS film movement, auger dosing, weighing and maintenance. Check which machine and product are shown before using a clip to assess your own application.

For a project-specific demonstration, name the operation you want to see and supply your product, dose and film or pouch. Ask for a run that shows feeding, filling, sealing and the finished packs under the agreed conditions. The trial and acceptance guide explains what to record.

Use videos as a starting point: machine suitability, speed, dosing accuracy and seal quality must be demonstrated with the declared product and packaging material.

Common questions

Video library questions

What should I look for in a machine demonstration?

Look beyond headline speed. Check product feed, dose repeatability, seal cleanliness, operator access, changeover, guarding and how finished packs leave the machine.

Can a video confirm machine suitability?

No. Demonstrations illustrate principles, but suitability and performance must be confirmed against the product, dose, sachet, film and acceptance criteria.

Can I request a product trial?

Send representative product and packaging information with the required output. Trial scope can then be reviewed as part of the project.

Tell us about your product and pack

Request a machinery demonstration or application review

Send the product, dose, sachet dimensions, film and target output. Where trials are appropriate, the test scope and acceptance checks can be defined before the demonstration.

Use video as traceable project evidence

Ask for a recorded run that matches the declared product and pack

A promotional clip can show machine movement, but it does not prove a different product, dose or film. A project run video should be tied to a test record and retained sample sachets so the operating conditions are clear.

Identify the configuration

Record model, dosing system, lane count, change parts, product and film batches, dose, sachet dimensions, seal pattern, coding and the recipe used.

Show the complete process

Include product and film feed, dosing, forming, sealing, photocell registration, coding, cutting, finished-pack discharge and any normal refilling or inspection.

Link footage to results

State the test duration, accepted output, rejects, dose sample results, seal or leak checks and the labels used on retained sample packs.

Start-up and stable runShow how the machine reaches the approved condition and enough continuous operation to demonstrate stable product, film and pack handling.
Normal challenge pointsWhere relevant, include product refill, reel or splice handling, stop-restart, coding check and the highest intended test condition.
Multi-lane evidenceShow the full web and identify how lane-specific dose, seal and cut samples are taken.
Retained recordsKeep the video filename or reference with the test sheet, machine settings, product and film identification and labelled sample sachets.

Define the project around your product and pack

Request a demonstration against your declared application

Send the product, dose, sachet and film, output and the quality checks you need to see. Where a trial is appropriate, Lancing Ltd can define the sample, run-video and acceptance evidence before testing.

Call 01494 623015 Get my machine recommendation